Dipl.-Chem. Dietmar Hirsch

Wissenschaftlicher Mitarbeiter / Ionenstrahlgestützte Technologien / Physikalische Abteilung
Vorsitz Betriebsrat

Leibniz-Institut für Oberflächenmodifizierung e. V.
Permoserstr. 15 / D-04318 / Leipzig /


Telefon: +49 (0)341 235 - 3313
Fax: +49 (0)341 235 - 2313



Liste der Publikationen >>

  1. S. K. Srivastava, C. Grüner, D. Hirsch, B. Rauschenbach, I. Abdulhalim,
    Enhanced intrinsic fluorescence from carboxidized nano-sculptured thin films of silver and their application for label free dual detection of glycated hemoglobin
    Opt. Express 25 (2017) 4761-4772

  2. R.G. Nikov, N.N. Nedyalkov, P.A. Atanasov, D. Hirsch, B. Rauschenbach, K. Grochowska, G. Sliwinski,
    Characterization of Ag nanostructures fabricated by laser-induced dewetting of thin films
    Appl. Surf. Sci. 374 (2016) 36-41

  3. P. A. Atanasov, N. E. Stankova, N. N. Nedyalkov, N. Fukata, D. Hirsch, B. Rauschenbach, S. Amoruso, X. Wang, K. N. Kolev, E. I. Valova, J. S Georgieva, S. A. Armyanov,
    Fs-laser processing of medical grade polydimethylsiloxane (PDMS)
    Appl. Surf. Sci. 374 (2016) 229-234

  4. P.A. Atanasov, N.E. Stankova, N.N. Nedyalkov, T.R. Stoyanchov, Ru G. Nikov, N. Fukata, J.W. Gerlach, D. Hirsch, B. Rauschenbach,
    Properties of ns-laser processed polydimethylsiloxane (PDMS)
    J. Phys. Conf. Ser. 700 (2016) 012023

  5. M.E. Koleva, N.N. Nedyalkov, P.A. Atanasov, J.W. Gerlach, D. Hirsch, A. Prager, B. Rauschenbach, N. Fukata, W. Jevasuwan,
    Porous plasmonic nanocomposites for SERS substrates fabricated by two-step laser method
    J. Alloy. Compd. 665 (2016) 282-287

  6. K. Bente, A. König, F. Dehn, P. Krüger, R. Wirth, D. Hirsch, T. Münster, C. Berthold,
    Vergleichende computertomographische und elektronenmikroskopische Studien zu eisenzeitlicher Korallenzier
    Metalla (Deutsches Bergbau Museum Bochum) Sonderheft 7 (2015) 59-61

  7. M.F. Sarmanova, H. Karl, S. Mändl, D. Hirsch, S.G. Mayr, B. Rauschenbach,
    Elastic properties of sub-stoichiometric nitrogen ion implanted silicon
    Nucl. Instrum. Meth. B 349 (2015) 169-172

  8. D. Manova, D. Hirsch, J.W. Gerlach, S. Mändl, H. Neumann, B. Rauschenbach,
    In-situ Investigation of Phase Formation During Low Energy Ion Nitriding of Ni80Cr20 Alloy
    Surf. Coat. Tech. 259 (2014) 434-441

  9. S. Mändl, R. Dunkel, D, Hirsch, D. Manova,
    Intermediate stages of CrN precipitation during PIII nitriding of stainless steel
    Surf. Coat. Tech. 258 (2014) 722-726

  10. A. Arabi-Hashemi, M. Erhardt, P. Lorenz, D. Hirsch, K. Zimmer, S. G. Mayr,
    Epitaxy from the liquid phase: tuning metastable phases in Fe-Pd thin films by laser-assisted rapid solidifica­tion on substrates
    J. Phys. D Appl. Phys. accepted (2014) n/a

  11. D. Manova, S. Mändl, J.W. Gerlach, D. Hirsch, H. Neumann, B. Rauschenbach,
    In situ X-Ray Diffraction Investigations during Low Energy Ion Nitriding of Austenitic Stainless Steel Grade 1.4571
    J. Phys. D Appl. Phys. 47 (2014) 365301

  12. B. Khanbabaee, B. Arezki, A. Biermanns, M. Cornejo, D. Hirsch, D. Lützenkirchen-Hecht, F. Frost, U. Pietsch,
    Depth profile investigation of the incorporated iron atoms during Kr+ ion beam sputtering on Si(001)
    Thin Solid Films 527 (2013) 349

  13. M. Stockmann, D. Hirsch, J. Lippmann-Pipke, H. Kupsch,
    Geochemical study of different-aged mining dump materials in the Freiberg mining district, Germany
    Environ Earth Sci 68 (2012) 1153-1168

  14. H. Lu, E. Thelander, J.W. Gerlach, D. Hirsch, U. Decker, B. Rauschenbach ,
    Ge2Sb2Te5 phase-change films on polyimide substrates by laser deposition
    Appl. Phys. Lett. 101 (2012) 031905

  15. S. Macko, J. Grenzer, F. Frost, M. Engler, D. Hirsch, M. Fritzsche, A. Mücklich, T. Michely,
    Iron assisted ion beam patterning of Si(001) in the crystalline regime
    New J. Phys 14 (2012) 073003

  16. J.W. Gerlach, T. Ivanov, L. Neumann, Th. Höche, D. Hirsch, B. Rauschenbach,
    Epitaxial GaN films by hyperthermal ion-beam nitridation of Ga droplets
    J. Appl. Phys. 111 (2012) 113521

  17. S. Macko, F. Frost, M. Engler, D. Hirsch, T. Höche, J. Grenzer, T. Michely,
    Phenomenology of iron-assisted ion beam pattern formation on Si(001)
    New J. Phys 13 (2011) 073017

  18. M. Cornejo, B. Ziberi, Ch. Meinecke, D. Hirsch, J. W. Gerlach, Th. Höche, F. Frost, B. Rauschenbach,
    Self-organized patterning on Si(001) by ion sputtering with simultaneous metal incorporation
    Appl. Phys. A 102 (2011) 593-599

  19. A. Gjevori, K. Nonnenmacher, D. Manova, B. Ziberi, D. Hirsch, J. Gerlach, S. Mändl,
    Phase Formation of Photocatalytically Active TiO2 Thin Films By MPIIID
    Proc. IVth International Meeting of the Institute Alb-Science, AKTET-Journal of Institute Alb-Science, International Annual Meetings, Vol. III Nr. 2, ISSN 2073-2244, Tetovo, 30.8-2.9. (2010) 157-161

  20. A. Gjevori, K. Nonnenmacher, B. Ziberi, D. Hirsch, J.W. Gerlach, T. Höche, D. Manova, S. Mändl,
    Investigation of Nucleation and Phase Formation of Photocatalytically Active TiO2 Films by MePIII&D
    Nucl. Instrum. Meth. B 267 (2009) 1658-1661

  21. D. Manova, D. Hirsch, S. Mändl, H. Neumann,
    Microstructure of Ti Thin Films Formed by Energetic PVD Processes
    Nucl. Instrum. Meth. B 267 (2009) 1680-1683

  22. B. Hopp, T. Smausz, C. Vass, G. Szabó, R. Böhme, D. Hirsch, K. Zimmer,
    Laser-induced backside dry and wet etching of transparent materials using solid and molten tin as absorbers
    Appl. Phys. A 94 (2009) 899-904

  23. D. Manova, T. Höche, D. Hirsch, S. Mändl, H. Neumann,
    Nitriding of Fe-Cr-Ni thin films by ion implantation
    Surf. Coat. Tech. 202 (2008) 2443-2447

  24. S. Heinrich, S. Schirmer, D. Hirsch, J.W. Gerlach, D. Manova, W. Assmann and S. Mändl ,
    Comparison of ZrN and TiN formed by PBII&D
    Surf. Coat. Tech. 202 (2008) 2310-2313

  25. D. Manova, D. Hirsch, E. Richter, S. Mändl, H. Neumann, B. Rauschenbach,
    Microstructure of Nitrogen Implanted Stainless Steel after Wear Experiments
    Surf. Coat. Tech. 201 (2007) 8329 8333

  26. K. Zimmer, R. Böhme, D. Hirsch, B. Rauschenbach,
    Backside etching of fused silica with UV laser pulses using mercury
    J. Phys. D Appl. Phys. 39 (2006) 4651-4655

  27. D. Manova, I.-M. Eichentopf, D. Hirsch, S. Mändl, H. Neumann, B. Rauschenbach,
    Influence of Microstructure on Nitriding Properties of Stainless Steel
    IEEE Plasma Sci. 34 (2006) 1136-1140

  28. R. Böhme, D. Hirsch, K. Zimmer,
    Laser etching of transparent materials at a backside surface adsorbed layer
    Appl. Surf. Sci. 252 (2006) 4763-4767

  29. S. Mändl, B. Fritzsche, D. Manova, D. Hirsch, H. Neumann, E. Richter, B. Rauschenbach,
    Wear Reduction in AISI 630 Martensitic Stainless Steel after Energetic Nitrogen Ion Implantation
    Surf. Coat. Tech. 195 (2005) 258-263

  30. S. Mändl, D. Manova, D. Hirsch, H. Neumann, B. Rauschenbach,
    Comparison of Hardness Enhancement and Wear Mechanisms in Low Temperature Nitrided Austenitic and Martensitic Stainless Steel
    Mater. Res. Soc. Symp. Proc. 843 (2005) T3.9.1-T3.9.5

  31. F. Bauer, H. Ernst, D. Hirsch, S. Naumov, M. Pelzing, V. Sauerland, R. Mehnert ,
    Preparation of scratch and abrasion resistant polymeric nanocomposites by monomer grafting onto nanoparticles. Part V. Application of mass spectroscopy and atomic force microscopy to the characterization of silane-modified silica surface
    Macromol. Chem. Phys. 205 (2004) 1587-1593

  32. R. Fechner, A. Schindler, D. Hirsch, T. Gase, R. Weigelt, M. Helgert,
    Fabrication of masters for an embossing Technology of diffractive optics and of sub-wavelength structures by RIBE proportional transfer
    10th Microoptics Conference MOC 04, Jena, 1.-3. 09. (2004) F-16

  33. P. Thomsen-Schmidt, K. Hasche, G. Ulm, K. Herrmann, M. Krumrey, G. Ade, J. Stümpel, I. Busch, S. Schädlich, A. Schindler, W. Frank, D. Hirsch, M. Procop, U. Beck,
    Realization of thickness standards below 100 nm thickness
    Appl. Phys. A 78 (2004) 645

  34. F. Bauer, H. Ernst, D. Hirsch, M. Pelzing, V. Sauerland, R. Mehnert,
    Surface modification of oxide nanoparticles for polyacrylate reinforcement
    Proc. RadTech Europe 2003, Berlin, 03.-05.11.03 (2003)

  35. J. Meinhardt, R. Mehnert, W. Bondzio, J. Reinhardt, D. Hirsch,
    Korrelation von Substraten und Prozessparametern bei PECVD-PVC-Mehrschichtsystemen für miniaturisierte Schaltungen
    11. Neues Dresdner Vakuumtechn. Kolloquium - (2003) 137-144

  36. C. Elsner, J. Dienelt, D. Hirsch,
    3D-microstructure replication processes using UV-curable acrylates
    Microelectronic Engineering 65 (2003) 163-170

  37. E.Erdem, R. Böttcher, H,.C. Semmelhack, H,.J. Gläsel, D. Hirsch, E. Hartmann,
    Preparation and Characterisation of lead titanate nanopowders from combined polymerisation and pyrolysis
    J. Mater. Sci. 38 (2003) 3211-17

  38. T. Chassé, H. Neumann, B. Ocker, M. Scherer, W. Frank, F. Frost, D. Hirsch, A. Schindler, G. Wagner, M. Lorenz, G. Otto, M. Zeuner, B. Rauschenbach,
    Mo/Si-Multilayers for EUV-Lithography by Ion Beam Assisted Deposition
    Vacuum 71 (2003) 407

  39. J.-D. Hecht, F. Frost, A. Sidorenko, D. Hirsch, H. Neumann, A. Schindler, S. Krasnikow, L. Zhang, T. Chassé,
    Influence of preparation parameters for low-energy ion beam nitridation of III-V semiconductor surfaces
    Solid State Electron. 47 (2003) 413

  40. A. Schindler, T. Hänsel, F. Frost, R. Fechner, G. Seidenkranz, A. Nickel, H.-J. Thomas, H. Neumann, D. Hirsch, R. Schwabe,
    Ion beam finishing technology for high precision optics fabrication
    ODF2002, Tokyo, Optics Design Group of The Optical Society of Japan, Technical Digest AP0 (2002) PD05

  41. A. Schindler, T. Hänsel, F. Frost, R. Fechner, A. Nickel, H.-J. Thomas, H. Neumann, D. Hirsch, R. Schwabe, G. Seidenkranz, K. Barucki,
    Ion Beam Finishing Technology for High Precision Optics Production
    OSA Technical Digest (Optical Society of America, Washington DC, 2002) (2002) 64 - 66

  42. N. Razek, K. Otte, T. Chassè, D. Hirsch, A. Schindler, F. Frost, B. Rauschenbach,
    GaAs surface cleaning by low energy hydrogen ion beam treatment
    J. Vac. Sci. Technol. A 20 (2002) 1492-1497

  43. F. Frost, D. Hirsch, A. Schindler, B. Rauschenbach,
    AFM tip calibration using nanometer-sized structures induced by ion beam sputtering
    Proceedings of SPIE 4449 (2001) 225-234

  44. F. Frost. D. Hirsch, A. Schindler ,
    Evaluation of AFM tips using nanometer-sized structures induced by ion sputtering
    Applied Surface Science 179 (2001) 8-12

  45. K. Otte, G. Lippold, D. Hirsch, R.K. Gebhardt, T. Chassé ,
    Conductivity Type Conversion of p-type CuInSe2 due to hydrogenation
    Appl. Surf. Sci. 179 (2001) 203-208

  46. J.-D. Hecht, F. Frost, Th. Chassé, D. Hirsch, H. Neumann, A. Schindler, F. Bigl ,
    In situ – characterization of the nitridation of AIII-BV semiconductor surfaces by means of x-ray photoelectron spectroscopy
    Applied Surface Science 179 (2001) 197-203

  47. D. Flamm, F. Frost, D. Hirsch ,
    Evolution of surface topography of fused silica by ion beam sputtering
    Applied Surface Science 179 (2001) 96-102

  48. U. Zeitschel, K. Otte, K. Zimmer, D. Hirsch, F. Bigl, V. Bigl ,
    Mechanical fixation of neurons and astrocytes with transparent three-dimensional micro-structures - a new tool manipulation of living cells
    J. Neurochem. 77 (2001) 04-63

  49. K. Otte, G. Lippold, D. Hirsch, T. Chassé, A. Schindler, M. V. Yakushev, R. W. Martin, F. Bigl ,
    In situ XPS investigations of ion beam hydrogenation of CuInSe2
    Thin Solid Films 387 (2001) 185-188

  50. R. Deltschew, D. Hirsch, H. Neumann, T. Herzog, K.J. Wolter, M. Nowottnick, K. Wittke ,
    Plasma treatment for fluxless soldering
    Surf. Coat. Tech. 142-144 (2001) 803-807

  51. G. G. Kuhnle, D. Haferburg, M. Grunow, D. Hirsch, U. Hahn ,
    Nano-electrospray mass spectrometry with a modified commercial IonSpray source
    Rapid Communications in Mass Spectrometry 14 (2000) 1307-1308

  52. St. Rudschuck, D. Hirsch, K. Zimmer, K. Otte, A. Braun, R. Mehnert, F. Bigl ,
    Replication of 3D-mircro- and nanostructures using different UV -curable polymers
    Microelectronic Engineering 53 (2000) 557-560

  53. K. Otte, G. Lippold, D. Hirsch, A. Schindler, F. Bigl ,
    XPS and Raman investigations of nitrogen ion etching for depth profiling of CuInSe2 and CuGaSe2
    Thin Solid Films 361-362 (2000) 498

  54. U. Zeitschel, K. Otte, K. Zimmer, D. Hirsch, F. Bigl, V. Bigl ,
    Transparent three dimensional microstructures for the trapping of living cells
    J. Neurochem 73 (1999) 41

  55. P. Bloss, A.S.De.Reggi, H.-J. Gläsel, E. Hartmann, D. Hirsch, H. Schäfer ,
    Thermal pulse investigation of polarization distributions in ceramic-polymer nanocomposites
    Adv. Sci. Technol. 17 (1999) 287-297

  56. K. Otte, K. Zimmer, U. Zeitschel, D. Hirsch, A. Reichenbach, F. Bigl, V. Bigl ,
    Transparent three-dimensional microstructures for trapping of living cells
    SPIE'S BioS 99, 23.-29.1.99, San Jose, USA - Proc. of SPIE 3605 (1999) 241-249

  57. U. Zeitschel, K. Otte, K. Zimmer, D. Hirsch, F. Bigl, V. Bigl ,
    Transparent three dimensional micro-structures for trapping of living cells
    Proc. of Joint Meeting of the Int. Soc. Neuronchem./European Soc. Neuronchem.; Berlin, 09.08-13.08.1999 (1999)

  58. K. Otte, K. Zimmer, U. Zeitschel, A. Braun, D. Hirsch, F. Bigl, V. Bigl ,
    Three-dimensional micro-structures for the embedding of living cells
    Microelectronic Engineering 46 (1999) 409-412

  59. F. Frost, G. Lippold, K. Otte, D. Hirsch, A. Schindler, F. Bigl ,
    Smoothing of polycrystalline Cu(In,Ga)(Se,S)2 thin films by low-energy ion beam etching
    J. Vac. Sci. Technol. A 17 (1999) 793-798

  60. M. Zeuner, D. Hirsch, H. Neumann, J. Zalman, H. Biederman ,
    Process diagnostics in magnetron sputtering of polytetrafluorethylene (PTFE)
    IEE Seminar Digest "Plasma Polymerisation" - Processing for the Future", London, UK (1999) 1-6

  61. H.-J. Gläsel, E. Hartmann, D. Hirsch, R. Böttcher, C. Klimm, D. Michel, H.-C.Semmelhack, J. Hormes, H. Rumpf ,
    Preparation of barium titanate ultrafine powders from a monomeric metallo-organic precursor by combined solid-state polymerisation and pyrolysis
    J. Mat. Sci. 34 (1999) 2319-2323

  62. M. Zeuner, D. Hirsch, H. Neumann, J. Zalman, H. Biederman ,
    Kinetic investigations in RF magnetron sputtering of PTFE
    Proc. 14th Int. Symp. on Plasma Chem. (ISPC) ed. by M. Hrabovský, M. Konrád, V. Kopecký, Prague - Czech Republik, Aug. 2-6, 1999, ISBN 80--902724-3-6 III (1999) 1527-32

  63. F. Frost, A. Schindler, D. Hirsch, F. Bigl ,
    A study of the submicron-scale roughening and smoothing of semiconductor surfaces during ion sputtering
    Precision Science and Technology for Perfect Surfaces, eds. Y.Furukawa, Y. Mori & T. Kataoka , The Japan Society for Precision Engineering, Tokyo, 1999 (Proc. of the 9th ICPE, Osaka/Japan, 29.08.-01.09.1999) (1999) 612-617

  64. U. Zeitschel, K. Otte, D. Hirsch, K. Zimmer, V. Bigl ,
    Analysis of living neural cells from rat brain by atomic force microscopy
    Biol. Chem. 379 (1998) 40

  65. I. Kartio, G. Wittstock, K. Laajalehto, D. Hirsch, J. Simola, T. Laiho, R. Szargan, E. Suoninen ,
    Detection of elemental sulphur on galena oxidized in acidic solution
    Int. J. Miner. Process 51 (1997) 293-301

  66. B. Ondruschka, M. Nüchter, F. Bigl, D. Hirsch ,
    Zur thermischen Zersetzung hydrierter Fullerene
    Tagungsbericht Statusseminar "Anwendungspotential der Fullerene" VDI-TZ Düsseldorf, Berlin 7. 11. 1996 (1996) 83-86

  67. G. Wittstock, I. Kartio, D. Hirsch, S. Kunze, R. Szargan ,
    Oxidation of galena in acetate buffer investigated by atomic force microscopy and photoelectron spectroscopy
    Langmuir 12 (1996) 5709-5121

  68. I. Pietzonka, D. Hirsch, V. Gottschalch, R. Schwabe, R. Franzheld, K. Bente, F. Bigl ,
    Atomic force microscopy on (001) surfaces of GaAs MOVPE layers
    Adv. Mater. 8/3 (1996) 264

  69. V. Gottschalch, R. Schwabe, F. Pietag, G. Wagner, R. Franzheld, I. Pietzonka, S. Kriegel, D. Hirsch ,
    Organometallic vapour-phase growth of InAs monolayer structures on (001)GaAs
    Proc. EW-MOVPE VI, Gent, 25.-28.06.1995 (1995)

  70. K. Zimmer, D. Hirsch, F. Bigl ,
    Microstructuring of surfaces by excimer laser machining
    Proc. SENSOR '95, Nürnberg, 09-11.05.1995 (1995)


<< zurück